Promotions of The Week!
Promotions & Coupons





Join our mailing list!



  Home > FPV Parts & Kits >

Chimera4 4SLR/3000 kv with Caddx Vista / Nebula Nano Digital HD System - BNF
Chimera4 4SLR/3000 kv with Caddx Vista / Nebula Nano Digital HD System - BNF


 
Alternative Views:
Map Price: $199.99

Stock Status:Out of Stock

Product Code: L009055
Qty:

Description
 
iFlight Chimera4 HD 4S 178mm FPV Racing Drone LR BNF 4inch SucceX-E F4 V2.1 FC 35A 4-in-1 ESC with Air Unit Digital System for Caddx Vista/ Nebula

NOTE: Air Unit Digital System for Vista would be available until end of Nov

Description：
Introducing our first ultra-light LongRange 4inch BNF for every terrain. Newest iFlight SucceX hardware on board coupled with our XING 1404 motors in different kv classes. Slow crusing or speedy action, theres something for every taste. Get flight times above 15min using at least 4S 850mAh packs. Go crazy and strap a Li-On 4S pack on and go even further, depending on capacity and weight!
GPS Rescue ready for easy recovery in case of signal loss, or even if you've been surfing those mountains and suddenly can't find the way back home.. Betaflight OSD pre-setup GPS elements will show you the way!
Outstanding digital FPV experience in 720p directly on your goggles. Custom iFlight 150mm LR antenna for best signal coverage even at long distance.


HIGHLIGHTS:
Sub 250g long-range quad
XING 1404 3000KV(Crusiser) / 3800KV (Speed Cruiser) Ultralight motors (Optional)
X-Geometry body for high performance handling and max. authority on pitch axis
DC (DeadCat geometry) bottom plate available (additional item, not included, no props in view)
GPS pre-installed for more safety at distance
SucceX-E mini F4 +35A 4in1 ESC Flystack
Naked ready for GoPro
360° TPU protection, protection for Vista cam and antenna mounts
Digital HD System for Caddx Vista

FRAME // ：Chimera4
Wheelbase: 178mm
Main body dimension: 136.8*114.8mm
Bottom to top distance: 28mm
Arm thickness: 4mm
Bottom plate thickness: 4mm
Top plate thickness: 2mm
TPU Camera plate thickness: 2mm
FC: 25.5*25.5mm/20*20mm/16*16mm
FPV Cam: 19mm Micro / 20mm
ELECTRONICS // SucceX-E mini F4 Stack (35A 4-in-1 ESC)：

SucceX-E mini F4
MCU: 168MHz STM32F405
Gyro: MPU6000
Blackbox: 8MB
Betaflight OSD: YES
BEC: 5V 2.5A
Uarts: 4
ESC Telemetry: yes
INA Pad: nuart2
Input voltage: 2-6S
Size: 25*25mm /20*20mm φ3 mounting
Weight: 4g
Firmware: BETAFLIGHTF4

Physical
Mounting hole: 20*20mm，φ3mm
Size: 25*25mm
NOTE: F.PORT protocol RX input support, telemetry not supported.

ESC // SucceX-E mini 35A
MCU: BB21 F16G
BLHeliS
Capacitance: 470uF/50V
Current Sensor: Yes
Input: 2-6S LIPO
Constant: 35A / Burst: 40A
BEC: No
Supports up to Dshot600, Proshot, Oneshot, Multishot
Target: G-H-30
BLHeliSuite download: http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file
Weight: 6.9g
Mounting pattern: 20*20, φ3mm with Grommets φ2mm
Dimensions: 31*30mm (including the power pads)
BNF // Parts list (Build)

Prebuilt and indoor tested Quadcopter:
1x Chimera4 frame
1x Digital HD System Kit
2x Albatross LHCP ipex 160mm antenna
1setx Nazgul 4030 props (Set of 2 - Color may vary)
1setx Gemfan 4024 Props (Set of 2 - Color may vary)
2x 15*150mm Microfiber PU Leather Battery Strap (Color May Vary)


Additional Suggested Parts (not included)
4S 850mAh / 4S 1100mAh
TPU Naked Mount for GoPro
for DJI HD FPV Goggles
Radio Controller
for DJI Remote Controller (Mode 1/ Mode 2)

Note：The camera mount donot included

Share your knowledge of this product. Be the first to write a review »