RCDEPOTHOBBIES.COM
Shopping Cart
(0 item: $0.00)
Proceed to checkout!
Home
|
About Us
|
My Account / Orders
|
Promotions
|
DJI Care
|
FAQ's
CATEGORIES
Clearance
NEW PRODUCTS
DJI / Caddx Innovations
FPV Cars
FPV Parts & Kits
FPV Electronics & Camera
FPV Batteries
Propellers
Hardware
Radio Equipment & Receiver
Electronics
Chargers & Power Supplies
Tools & Supplies
FIND PRODUCTS BY
Shop By Brand
Shop By Price
$0 - $25
$25 - $50
$50 - $100
$100 - $250
$250 - $500
$500 and up
Shop By Category
Promotions of The Week!
Promotions & Coupons
Join our mailing list!
Home
>
Radio Equipment & Receiver
>
Radios
>
RadioMaster TX16S Metal CNC Hall Gimbal AG01 Set of 2
Alternative Views:
Map Price:
$
99.99
Stock Status:
Out of Stock
Product Code:
HP0157.AG01
Qty:
Description
Specification
Item: AG01 CNC Hall Gimbal Sets
Sensing type: Hall
Working voltage: DC 3.3V
Linearity: Real-time (No delay)
Adjustable travel range: 38°—54°
Adjustable mode: Yes
Adjustable tension: Yes
Quad bearing: Yes
Temperature range: -20°c-85°c
Size: 60*53*56mm
Weight: 125g/pc
EXTERIOR ADJUSTABLE
① Set the lower travel limit: Turn the screw clockwise to reduce the travel. Turn the screw counterclockwise to increase the travel. Travel range (38-54°)
② Set the upper travel limit: Turn the screw clockwise to reduce the travel. Turn the screw counterclockwise to increase the travel. Travel range (38-54°)
③ Up and down spring tension: Turn the screw
clockwise to increase the up and down spring tension.
Turn the screw counterclockwise to reduce the up and down spring tension.
④ Centering and Mode adjustment: When the screw is turned clockwise to its lowest point, this gimbal will not center in its up and down axis when the stick is released. When the screw is turned counter-clockwise to its highest point, this gimbal will center its up and down axis when the stick is released.
⑤ Left and right spring tension: Turn the screw clockwise to increase the left and spring tension. Turn the screw counterclockwise to reduce the left and right spring tension.
Throttle tension adjustment: When there is no tension up and down, the ⑥screw adjusts the tension tightness, and the ⑦screw adjusts the scale tightness.
Size
Associated Products
TX16S Mark II Series Radio
AG01 CNC Hall Gimbal Sets New Colors
AG01 MINI CNC Hall Gimbals for TX12 & Zorro
TX16S Replacement HALL V4 Gimbal
Package Includes
1 *
AG01 CNC Hall Gimbal (Centering / Throttle)
1 * TX16S Softer Tension Spring Set
1 *
Hexagon socket screwdriver
1 * Manual
Or
1 * AG01 CNC Hall Gimbal (Throttle)
1 * AG01 CNC Hall Gimbal (Centering)
2 * TX16S Softer Tension Spring Set
2 *
Hexagon socket screwdriver
1 *
Manual
FAQs
Share your knowledge of this product.
Be the first to write a review »