Promotions of The Week!
Promotions & Coupons





Join our mailing list!



  Home > FPV Parts & Kits > iFlight-RC >

iFlight Nazgul 5 V2 6S Analog (xm+)
iFlight Nazgul 5 V2 6S Analog (xm+)


 
Alternative Views:
Map Price: $270.99

Stock Status:In Stock
Product Code: F008540
Qty:

Description
 
PRODUCT DESCRIPTION
Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!



Tips:



VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.



HIGHLIGHTS:

- 5mm arm design for more durability

- Easy-Swap arms

- LED illuminated Logo

- XING-E 2207 motors and NAZGUL 5140 props
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks



XL5 V5 frame specs:

SucceX-E F4 45A flight stack
XING-E 2207 FPV Motor （6S 1800KV / 4S 2750KV)
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 393.4g (without battery)

PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"


Nazgul5 V2 Quad BNF Included Components and Parts

Prebuilt and tested Quadcopter
1x XL5 V5 Frame
1x Caddx Ratel, 2.1mm lens camera
1x Albatross RHCP SMA 5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


FC // SucceX-E F4 Flight controller

- MCU：STM32F405

- Gyro：MPU6000

- Betaflight OSD：YES

- Blackbox：8MB

- 4X Uarts（1 2 3 6 )

- 8 x Dshot/Proshot/Oneshot output

- 8 x individual ESC power/ signal pads

- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX

- VTX telemetry: YES

- WS2812 led Strip：YES

- Baro：No

- Beeper：YES

- Input：2-6S（Max 8S）

- BEC：5V/2.5A cont

- Firmware target : BETAFLIGHTF4

- Mounting：30.5*30.5mm，φ4mm with Grommets φ3mm

- Dimensions：36*36mm

- Weight：7.6g



ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 40*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 14.4g

- Supports 2-6S Lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware

- Current sensor: YES

- BEC: NO

- Supports: DShot150/300/600/1200/MultiShot/OneShot etc.


- Target: G-H-30 BLS 16.7



VTX// SucceX Force 5.8g 800mW VTX Adjustable

- The output power is stable;

- Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;

- Output 48 frequency points,

- Frequency lock fast, the boot does not interfere with companions;

- Built-in output power self-check function;

- Full format video format: NTSC /PAL;

- Wide input voltage range. low power consumption:

7V～36V，+12V/380mA@800mW;

- Small size:36*36*3mm

- Mounting holes 4-M3

- Lightweight: 7.2g(excluding antenna)

Specs:

- Item: SucceX-Force 800mW adjustable VTX

- Input voltage:5V

- Output voltage/ Max current: 5V 1A

- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@400mW, 380mA@800mW

- Output 48 frequency points,

- size:36*36*3mm

- PIT/25mW/200mW/400mW/800mW

Share your knowledge of this product. Be the first to write a review »