Join our mailing list!



  Home > FPV Parts & Kits > iFlight-RC >

New!  iFlight Nazgul 5 V2 HD 4S (DJI)
iFlight Nazgul 5 V2 HD 4S (DJI)


 
Alternative Views:


Map Price: $325.00

Stock Status:In Stock
Product Code: F008527
Qty:

Description
 
Nazgul5 HD is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Vista Digital HD System on it. We sticked the lighter Caddx Vista on one of our new updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!



HIGHLIGHTS:

- 5mm arm design for more durability

- Easy-Swap arms

- LED illuminated Logo

- XING-E 2207 motors and NAZGUL 5140 props
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks



XL5 V5 frame specs:

SucceX-E F4 45A flight stack
XING-E 2207 FPV Motor (6S 1800kv / 4S 2750kv)
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 400.8g (without battery)

PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"


Nazgul5 HD Quad BNF Included Components and Parts

Prebuilt and tested Quadcopter
1x XL5 V5 Frame
1x Caddx Vista Digital HD System Kit
1x Albatross LHCP RP-SMA 5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


FC // SucceX-E F4 Flight controller

- MCU:STM32F405

- Gyro:MPU6000

- Betaflight OSD:YES

- Blackbox:8MB

- 4X Uarts(1 2 3 6 )

- 8 x Dshot/Proshot/Oneshot output

- 8 x individual ESC power/ signal pads

- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX

- VTX telemetry: YES

- WS2812 led Strip:YES

- Baro:No

- Beeper:YES

- Input:2-6S(Max 8S)

- BEC:5V/2.5A cont

- Firmware target : BETAFLIGHTF4

- Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm

- Dimensions:36*36mm

- Weight:7.6g



ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 40*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 14.4g

- Supports 2-6S Lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware

- Current sensor: YES

- BEC: NO

- Supports: DShot150/300/600/1200/MultiShot/OneShot etc.


- Target: G-H-30 BLS 16.7

Share your knowledge of this product. Be the first to write a review »