Specifications

• Flight Tower: SucceX-E mini F7 FC + 35A BLHeli_S 4 in 1 ESC + 300mW VTX
• Top and bottom plate spacing: 27mm (aluminum column height 27mm)
• Motor: XING 4S X1408 3600KV / 6S 1507 2800KV (Unibell)
• Camera: RunCam Nano2 2.1MM NTSC 4:3
• FC pattern: 20*20mm, 30.5*30.5mm
• Frame size: 111*93mm111*93mm
• Weight: 280.1g(without battery)
• Bottom plate thickness: 2.5mm
• Top plate thickness: 2mm
• FPV cam spacing: 14mm
• Propeller size: 3 inch
• Wheelbase: 145mm

PRE-TUNED & PRE-SETUP:

• Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
• To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
• Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
• Please check this link on "How to disable Angle-Mode, activate Acro-Mode"

TIPS

• VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

Recommended (Not Included)

• 4S 1300mAh
• 6S 1050mAh

Includes

• 1x iFlight Green Hornet V3 Cinewhoop - PNP (4S or 6S)
• 2x 3040 3-blade prop (Set of 4 - Color Varies)
• 2x iFlight Lipo Straps
• 1x Accessories Bag

Note: GoPro Camera Housing Not Included